Upscale Hotel Aufzug

Modell Nr .: KJX-JD208 Kapazität: 500-1000kg Geschwindigkeit: 1.00 - 2.00m / s Höhentür: Mitte Öffnungs-Tür Modell: Gearless Passenger Elevator Zertifizierung: ISO SGS Maschinenraum: Optional Spezifikation: GB7588-2003 und EN81 HS-Code: 8428101090 Fahren Art: Wechselstube Aufzug Personen: 6 - 10 Position des Computerraums: oben Verzögerungsvorrichtung: mit Verzögerungsvorrichtung System: Monarch 3000new oder Schritt Garantie: 18 Monate nach Versand Datum Warenzeichen: KUIKO oder OEM Ursprung: Zhejiang, China Dieser Hotelaufzug hat einen Genaue und effektive Steuerung durch die modernste Technologie & Zeitraum; Darüber hinaus bietet KUIKO Aufzug den besten Preis für unsere Kunden & Zeitraum;

Das Ziel von KUIKO Aufzug ist beste Qualität, guter Preis, pünktlicher Versand und überlegener Service & Zeitraum;

1 & Periode; Aufzug Produktion Beschreibung:

Decke: KDD-20
Kontrollbox: KCZ-11 & ll; Titan-Spiegel Edelstahl & rpar;
Auto-Wand: Marmor, Spiegel aus rostfreiem Stahl geätzt Titan lackiert
Frontwand: Spiegel aus rostfreiem Stahl mit Titan lackiert
Lintel: Spiegel aus rostfreiem Stahl mit Titan lackiert
Limousine Tor: Spiegel aus rostfreiem Stahl mit Titan lackiert
Fußboden: KDB-08 & lpar; Material: Marmor & rp;
Armlehne: KFS-07 & ll; Eine in jeder Seite & rpar;

2 & Periode; Installation:

Wir sind nicht verantwortlich für die Installation für ausländische Kunden, aber wir freuen uns, unsere Ingenieure zur Verfügung zu stellen, um die Installation auf Kosten der Kunden zu erledigen, wenn es wirklich benötigt wird. Wir sind nicht empfehlen unseren geschätzten Kunden auf diese Weise zu übernehmen, da die Kosten wirklich riesig in der Tat & Zeitraum sind;

3 & Periode; Agent gesucht:

Wir sind immer auf der Suche nach qualifizierten & Sol, erfahrene Aufzug Distributoren zur Zusammenarbeit mit uns auf langfristige Basis & Zeitraum; Wir freuen uns, den Vertriebspartnern unseren Aktionspreis als Belohnung für die Zusammenarbeit und den Zeitraum zur Verfügung zu stellen. International Agent Geschäft und & Sol oder OEM-Fertigung, beide sind willkommen in unserem Unternehmen & Zeitraum;

4 & Periode; Kundenbetreuung:

Wir garantieren, dass alle Ersatzteile und & Sol oder Zubehör Original Qualität Produkte & Zeitraum waren; Wir garantieren, dass alle Produktion und Inspektion in unserem Werk strikt nach dem chinesischen Standard GB7588-2003 & Europe Standard EN-81 & Zeitraum durchgeführt wurden.

Basic function
Collective Control	In automatic or drive operation state, the elevator will automatic response the signal from instructions, operation direction etc, any passenger in each floor can call elevator.
Inspection travel	This function is used in inspection or testing of elevator. When in line with the operating conditions, press up/down button, the lift willoperate upwards or downwards by the inspection speed. When it loosens the button, it will stop the operation.
low speed self-correction operation	When the elevator under un maintenance, and did not stop on a flat area. At this time if meet requirements for safety operation, the elevator will automatically slow running to a flat area, and open the door.
test running	It is designed to test or examination new ladder function. The all-in-one a parameter is set to test running, the elevator will automatically run. the total number of Automatic operation and interval time of each run can be set by parameter.
Timing control	System has internal real-time clock, so when breakdown, elevator will write down the exact time of each fault occurring; In addition, some function involving the time control based on clock.
door opening/closing adjusting	Rise the system performance by adjusting the door hold time for both car door and landing door separately.
in-the-hall door opening	In the halls, the doors can be opended by means of pressing the door-opening button. As long as the button is being pressed, the door will keep opening.
the close door button can be used to close the door in advance	Under Automatic status, press the close button, it can cancel door opening function. When the door is in the open position, the close button can be used to close the door immediately.
exchange landing	If the time of the elevator openning more than set time, the door limit still no act, the elevator will turn into a closed state, and after the door closed, the elevator will drive to the nearest landing.
false order cancellation function	This function refers to the cancellation of a falsely resigisterd order/calling; this can be done through continously pressing the button twice.
Direct arrival	Elevator low spped according to the principle of distance, no operation at the flat layer.
load non stop	When the car carrying weight to full load(normally 80%capacity), the full signal will generate in the hall display, the elevator will only response the car signals and no longer response hall signals.
energy saving with illumination and ventilation(time can be customized)	Under automatic state, if elevator without instructions or outside call registered more than 3 minutes (3 minutes is the default value, this time can be adjusted through the parameter), the system will automatically cut off power of illumination and ventilation fan in the car. However, all these functions will be reemployed as soon as elevator receives the instructions or calls..
floor of lobby	When automatic running, if floor of lobby function is valid, so when no resgistration of calls or operations after preset timeout, the car will return to preset main stop and wait there.
retry shutting down the door	In order to prevent the door can not closed by the accidental failure of door operation system or certain obstacle blocked in the middle of the door. Under this situation, try to close again.
the operational fault records	The record can contain up to 20 functioning incidents that happened most recently, including time ,floor, the code deployed for each incident.
self-tuning of landing distance in hoistway	Before an elevator is put into use, it is required to perform an self-tuning of landing distance in hoistway, in order to study all kinds of data in hoistway, and save these data permanently.
the choice of service layer	By handheld operator, lift can be set to stop which floor, and which floor do not park.
character setting for floor symbols	This function can be done through handheld operator, character can be set in various floors, such as underground first floor is set by "B"etc.
attendant service	The attendant operation feature allows semi-automatic operation with manual control.
independent service	This function is designed for meeting customers'special needs. When switched on independent service the elevator will only answer any registered car call deviating from group control, regardless of the hall calls while opening or closing the door by manual control and operating according to customers' registered signals.
Fire emergency return to run	When encountered fire, after setting the fire switch to place, elevator immediately eliminate all instructions and calling, operate to the fire basement in the fastest way, then open the door to stop.
Automatic correction floor position signal	During system running, revise the location of the data by self learning to location signal of elevator of each terminal switch action point and each layer leveling switch action point
Elevator lock service	Run automatically or driver condition, after elevator lock switch is setting, which will eliminate all call to register, only response instructions until no registration in the car. And then return to the basement, automatically open the door and turn off lighting and fan in the car, light open button lights, automatically close door after 10 seconds delay, and then stop running. After elevator lock switch is reset, elevator will start normal operation.
The protection of non open door outside the landing door	in order to be safe, outside the landing door, no open the door.
light curtain	Light red unit for special purpose enhanced the safety of elevator, an infrared curtain can be formed in front of the car door, and a quick response to reopen will be implemented once something entering this area.But light curtain did not work in fire fighting.
overload protection	When the load of the car exceeds rated capacity. Overload operations is triggered, this operation opens the door, sounds the buzzer, and illuminations the overload lamp. The overload conditions is removed when the weight of the car fails below the rated load.
anti-nuisance car call protection	If there is only one passenger in the car, and an excessive number of car calls is registered, nuisance is detected and all caar calls will be cancelled, requiring registration of a proper number of calls.
reverse running protection	Whenever the system inspects a converse movement of an elevator as contradicting to the signaling direction, the elevator will stop all of its operations, and the fault alarm will be sounded, until the problem is fixed or the control panel is rechanged again.
Running time limiter	When an elevator operates contiously, if the operating time exceed the stipulatied time(Max 45 seconds), the flat layer's switch no action, then the elevator will stop operation.
Deceleration switch fault protection	Under the conditions of deceleration switch failure, elevator stop urgently to prevent header or squat down bottom.
protecting elevators from runnby floors	Every elevator is installed with terminal deceleration switch and terminal limit switches on its upper and lower terminal landing, in order to ensure that the elevator will not surpass the distance of travel.
safety loop protection	Security system received safety loop failure signal, the elevator will immediately stop operation until the obstacle solved.
overspeed protection	When speed beyond control run result in safety and protection.
Flat layer switch fault protection	In order to prevent the abnormal situation made by failure flat layer switch, elevator adopts a security protection.
shaft self-learning failure diagnosis	The shaft data is the basis of a control system for high speed operation, if no accurate shaft data, the elevator will not be able to run normally, so the shaft self-learing failure diagnosis should be set when shaft self-learing failed to complete.
Door lock fault protection	When system detects door lock abnormal, in order to prevent elevator running continuously, this function is usded to make sure the safety of elevator.
the door lock off protection in the operation	It is detected the door lock off in the operation, the elevator has to stop operation.
parallel running	Two elevators transfer data through CAN serial communication bus to realize and coordinate the function of each landing doors' call in two elevators. so as to improve the operation efficiency of elevator.
NDG	When an elevator has NDG function, if the light curtain action or other reasons make door continuously opening without door-shut signal, the door was forced to close with NDG signals.
Waiting for base station opening	Elevator is selected in base station to open door for waiting through the parameter
Time floor block function	It is thespecified blocked service to specified floor at a specific time. Specific blockade service refers to individually block outside call registration, also individually block the instruction registration, also block instructions and outside call registration, and also not block.
CAN communication interference evaluation	Controller tests the quality of CAN communication.
Coder iterference assessmen	Controller tests the Coder signal interference.
car testing	Provide a revolutionary way of the elevator testing, worker can directly testing the lift, monitor the elevator running status in the car, in order to make the function such as elevator flat layer, comfort more hunmanize.

Produktgruppe : Personenaufzug